About the Extra Mappable Trigger M1/M2:

1. The back button on the controller is easy to program and adjust.

2. This switch controller can map up to 16 buttons.

3. You can map the M1/M2 button one by one.

4. Press M1/M2 and "—": map only one button

5. Press M1/M2 and "+": map the key combination

6. When you want to use the ultimate skill with one key in the switch games, you can set key combination.

7. The speed at which a key is mapped affects how quickly it reacts in-game.

Setting Method:

(assuming you want to map the Y+B+A+L+R buttons on M1 button)

1. Press "M1" and "+" at the same time, and the lights on the controller will flash slowly;

2. Press the Y/B/A/L/R button on the controller one by one, and the indicator light will flash quickly

3. Finally press the M1 button, the indicator light will be on, indicating that the mapping is completed.

Close the Mappable M1/M2 Function:

If you don't want to use the mapping function of the M1/M2 buttons, your hands may habitually touch these two buttons, which will affect the game. Steps: Press and hold the "—" and "T" buttons for 3s, and after the wireless switch controller vibrates for 1s, the function is closed.

How Can You Get The Switch Controller To Pair With The Console Or PC?

How to pair the nintendo switch controller to the console?

1. In the HOME menu, click on "Controller"→"Change Grip and Order", enter the Controller pairing mode;

2. Press and hold the "Y"+"HOME" button for 3-5 seconds, the LED lights will flash quickly and then be on;

3. After pairing, you could start playing the nintendo switch games.

How to pair the switch controller to the pc/windows?

1. Plug your controller into a spare USB port on your computer with the USB cable;

2. Hold the Sync button on the controller until the lights start flashing for 3s;

3. Windows will automatically recognize the device and do its thing.

Please Note: Only wired mode for PC windows system.

About Turbo Function:

Press "Up” arrow on the D-pad and "T" button: Increase burst speed

Press "Down” arrow on the D-pad and "T" button: reduce burst speed

Three-level speed: 5 shot/s, 12 shot/s, 20 shot/s.

During bursts, the indicator light will flash.

The higher the switch controller's burst speed, the faster the indicator light will flash.

Solutions for Switch Controller Getting Stuck:

Move the stuck joystick to the center position, and then press down gently.

Solutions for Drift:

If the controller drifts, you can calibrate the controller. Steps: Click "Settings", click "Handle and Sensing", and click "Calibrate Joystick".